Find new and used flatbed, equipment, dump, and cargo trailers for sale in Arkansas.

(501) 982-9022

3903 Hwy 367 S.
Cabot, AR 72023

PJ Tilt Deck Car Haulers

6" Channel Equipment Tilt


Powered Full Tilt 


83” Hydraulic Quick Tilt 


83” Manual Tilt 


5" Channel Tilt Car Hauler 


8" Channel Tilt 


Single Axle HD Tilt 


Standard Features Include:

3 Year Frame/1 Year Limited Warranty
The industry standard frame warranty for most tilt trailers is one (1) year. We believe so strongly in our frame strength that we offer a three (3) year frame warranty on every PJ tilt trailer.
Knife Edge Tails
Our car hauler tilt tails have a "knife-edge" design, making them scissor/fork lift friendly. The tail lays flush to ground eliminating the "bump" other tilts have to drive over. This is especially useful when loading equipment with small wheels, winching vehicles on to the deck, or loading in wet/icy conditions.
3” Channel Cross-members on 16” Centers
We use 3” channel for all tilt cross-members for increased deck strength. We also keep our cross-members spaced tightly together (16” or less). Many manufacturers use lighter cross-members and spread them further apart to try to cut costs.
Radial Tires
Radial tires are superior to bias ply tires in many ways. Radial tires feature better fuel economy, less vibration, a softer ride, and extended life due to less heat being generated by the tire. Radial tires are especially important for tilt equipment trailers due to some of the heavy loads they must handle.
Bulldog Coupler
Every PJ tilt receives a Bulldog™ coupler as a standard feature. These couplers are height adjustable to allow you to level the trailer with the towing vehicle. The Bulldog™ coupler has a well-earned reputation for being the toughest, most durable coupler in the trailer industry.
Removable Diamond Plate Fenders
Our fenders are made of 14 gauge diamond plate steel for increased durability. They can also be easily removed for off-road use or easy replacement. Not only are our diamond plate fenders tougher than the typical smooth plate, they look great too!
Pressure Treated Lumber
PJ tilts receive treated no. 2 southern yellow pine for decking. This pressure treated lumber is known for its high strength and durability. We also offer Douglas Fir and Rough Oak decking. Note: T5, TH, TM are decked with Spruce Pine Fir
Hydraulic Cushioned Gravity Tilt
Our gravity tilts use a hydraulic cylinder, reservoir, and proportioning valve to control the rate the trailer tilts. We also use a simple and secure latching device with mulitple grease zerks for years of reliable service.
Low Deck Height and Load Angle
We use a combination of torsion axles and frame design to keep our deck heights as low as possible. With lower deck heights we achieve lower load angles, allowing a wider variety of equipment to be loaded.
Premium Hydraulic Hose and Fittings
One place other tilt manufacturers try to save a few bucks is by using cheap hydraulic hoses and hardware. At PJ Trailers we use high quality Parker hoses and fittings on every tilt trailer we build. This ensure years of safe and reliable operation.
Rub Rail with Stake Pockets & Pipe Spools
Our standard 2” x 3/8” rub rail includes both stake pockets and pipe spools on 12” centers. These give you almost unlimited tie down points, while also strengthening the rub rail. Note: The TH and TM include stake pockets but do not include rubrail
Grease Zerks
We are obsessed with making sure our trailers provide years of reliable service. Our tilts trailers have quite a few moving parts so we add grease zerks to all of them. While other manufacturers’ moving parts will be seized or rusted, ours stay smooth and ready for work.
I-beam Gooseneck Tilts
When you order a PJ gooseneck tilt it comes with an I-beam neck and riser. Our I-beam necks are simply stronger and last longer than the commonly used c-channel necks. Simply put, we feel that I-beam goosenecks should be standard, not an expensive “upgrade”.
Lifetime LED Lights
Every PJ tilt trailer features Lifetime LED lightsstandard. Our LED lights are not only brighter but they are faster, last longer, and draw less current than incandescent lights. Our LED lights are so reliable they feature a lifetime warranty.
Retail Financing Promotions
We offer factory sponsored retail financing promotionsthrough Sheffield Financial. These promotions typically include Zero Down and/or low interest rates.
Wiring Harness Inside Steel Conduit
Trailer wiring issues are one of the most common and frustrating problems for trailer owners. Our harness is enclosed in steel conduit throughout the frame of the trailer, to protect the wiring from ice, road debris, and physical damage. This modular harness means each light is just simply plugged in, making replacement very easy.
Flush-mount Lighting
All of our trailer lights are “flush-mounted” inside the frame of the tilt. Surface mounted lights are much more susceptible to damage, corrosion, and failure.
NATM Compliant
Our tilt trailers are built in compliance with the National Association of Trailer Manufacturers trailer safety regulations. Be very wary of any manufacturer that does not comply with NATM safety standards.
Bargman 7-Way Plugs
All PJ tilt trailers include a Bargman 7-way plug. These plugs are designed with dual contacts for a more reliable connection. They also include an auxiliary wire that can be used to operate work lights, reverse lights, & charging.
The Professional’s Choice
At PJ Trailers we think our best “advertising” comes from jobsites and coffee shops, not on billboards and television ads. We didn’t “buy” our reputation for building great trailers, we built it – one trailer at a time. Building a great product and keeping our customers happy has made us the #1 professional grade open trailer manufacturer in the US.
Frame Strength
If you want a tilt trailer that lasts, it must be built on a rock solid frame. Other trailer builders attempt to cut their cost by skimping on frame materials (smaller channels, fewer welds, less cross-members). Our tilt takes frame strength to the next level and we have the warranty to prove it.
CNC Plasma Cut Components
We fabricate many of our frame components on CNC plasma tables. This allows for excellent finish to each component, consistent fit, and smooth operation. It also gives us the ability to customize the exact component we need for each model, instead of being forced to use “off the shelf” components.
Dealer Network
When shopping for a tilt trailer one thing to take into consideration is the size and quality of the dealer network that will provide support for the manufacturer. PJ Trailers has a network of over 250 dealers that is well known for offering excellent service and support.
Resale Value
Our premium components and overall build quality makes for a tilt trailer that typically retains much of its original value when well maintained.
Wide Variety of Options
We don’t believe a customer should have to settle for a trailer that isn’t what they want. That is why we offer a wide variety of options for our tilts including steel floors, deck on the neck, winch plates, hydraulic jacks, cold weather wiring harness, and more. We literally have thousands of option combinations to make sure your trailer is suited for your type of work.
10 Gauge Heavy Duty Brake Wiring
We use 10 gauge wiring for our trailer brakes to make sure the brakes receive full power to stop the trailer. The best break controller and electric brakes can quickly become inferior if the wire is too small to transmit full power to the brakes. This wiring is slightly more expensive than what others use but it is well worth it.
More Deck Screws & Board Caps
We use extra deck screws on our tilt flooring to make sure boards stay secured to the frame. We also "cap our boards" by installing them below the front and rear bumpers to keep the boards from curling.
Watertight Heat Shrink Connectors
One of the most common places other manufacturers try to cut cost and save labor is by using splice connectors (commonly known as "Scotch Locks"). Splice connectors offer little to no protection against water and corrosion. We use heat shrink butt connectors that are watertight and extremely reliable.
More Axle, Brake, and Suspension Options
If there is an axle, brake, or suspension combination you would like to have on your tilt, we probably have it. We work very closely with our vendors to provide a wide variety of axles and suspensions. These include hydraulic disc, hydraulic drum, torsion suspension, drop axles, air brakes, and more.
Better by Design
Great materials, components, and build quality are irrelevant if the trailer is poorly designed. When you have built tens of thousands of tilt trailers you receive ample feedback about your product (both good and bad). We have used this valuable information to refine our product, making both major innovations and minor improvements over the years. We continue to develop new ideas and solutions to keep our tilt trailers at the top of industry.
Visual Appeal
Having a great looking trailer adds professionalism to your business and gives your customer extra confidence. Our customers often make a large investment in their truck and expect their trailer to compliment the vehicle towing it. We believe you should be proud of your trailer, not embarrassed!
More Standard Features
- Powder Coated Wheels
- Powder Coated Axles
- 3M DOT Reflective Tape
- Pinstriping