Trailer Accessories

SOLAR BATTERY CHARGER

We offer a 2 watt solar charger to help maintain your battery for dump trailers and tilt trailers.

These work well in conjunction with our integrated battery charger.

The panel is protected by a clear polyurethane coating that makes them extremely durable and weather proof.

This panel has a 5 year limited warranty.

Cargo Tie-down Loops

Our utility trailers come with stake pockets standard but some users prefer to use tie-down loops that sit above the deck.

These are great for strapping four wheelers, UTVs, motorcycles, mowers, and other cargo.

The cargo tie-down loops are sold in pairs, with two pair (4 loops) being the most common.

  • Rated at 1000 lbs capacity
  • Loops angled at 45 degrees
  • Loops mounted on top of the outside frame
  • Standard on expanded metal and solid sides
  • Option code: -TD01 (2 loops), -TD02 (4 loops), -TD03 (6 loops), etc…
Red PJ Cargo Tie Down Loop
Black PJ Cargo Tie Down Loop
PJ Cargo Tie Down Loop

Bolt On Chain Rack

Features:

  • Rack stores up to 5 chains
  • Bolts to c-channel behind risers and front gussets on PJ gooseneck trailers
  • Can be locked to help prevent theft
  • Can be mounted to driver or passenger side (two racks recommended for chains & boomers)
  • Fit FS, FD, LD, FY, LY, & SD models
PJ Trailers Bolt-on Chain Rack Accessory
PJ Trailers Bolt-on Chain Rack Accessory

Wireless Remote for Trailers

One of the most popular additions for dump trailers, tilt trailers, hydraulic jacks, and winches are wireless remotes.

They make operating trailer hydraulics extremely convenient and fast.

Our wireless remote is built by the same manufacturer as our hydraulic pump, so it is truly a “plug and play” installation.

To install, simply separate the quick connector from the corded controller and tee in the matching connectors from the wireless.

Hook up the positive and negative power feeds to the battery and attach the external antenna to the outside of the toolbox and you are ready to go.

  • Easy plug & play installation
  • Equipped with an 15 amp fuse to protect against electrical overload
  • 20 minute sleep program for safety, to prevent accidental operation or unauthorized use
  • Is not compatible with gravity down pumps or pumps with 4 way pendants
  • PJ Part # 190101

Bolt-on Light Bar

Do you want to load and unload your trailer at night?

Check out our easy to install bolt-on light bar.

This light bar features four (4) round utility lights that give you ample lighting and installs in around 30 minutes.

  • Fits on the channel cross-members between the risers on any PJ Gooseneck
  • Includes four (4) round utility lights in a shock proof rubber housing
  • Lights can be adjusted vertically and horizontally
  • 1 1/2′ mandrel bent round tube protective bar, lower frame built from 3/16′ powder coated steel
  • Pre-wired with generous 9ft of wiring for simple two-wire installation (includes automotive inline fuse)
  • Toggle switch is mounted to light bar, for easy access from the trailer deck or ground
  • Lights are wired to junction box and powered by tow vehicle
  • Lights are connected with heat shrink butt connectors for protection and reliability (see photo below)
  • Wiring for each light is protected by angle conduit (see photo below)
  • Includes zinc plated hardware (nuts, washers, & bolts) and instructions for installation
  • Tools required for installation: Cordless Drill, 3/8′ Drill Bit, 1/2′ Wrench, Screwdriver, and Pliers
  • Light bar dimensions: 42′ wide x 12.5″ tall x 4″ deep weight: 26 lbs
  • If ordered with a top riser toolbox the light bar must be mounted forward on the neck on top of the I-beam

Notes: Work lights are for stationary use only, lights must be off during transit

Available Colors

  • Black: PJ Part # 170126
  • Red: PJ Part # 170129
  • Grey: PJ Part # 170130
  • White: PJ Part # 170131
  • Yellow: PJ Part # 170132
Play Video about PJ Lightbar Install Video Placeholder

INSTALLATION INSTRUCTIONS​

WARNING: Trailer should be UNPLUGGED from towing vehicle during installation

Estimated Installation Time:

Novice (1 hour)

Expert (30 minutes or less)

TOOLS REQUIRED

  • Cordless Drill
  • 3/8′ or 1/2′ Drill Bit
  • 1/2′ Open Wrench
  • 1/2′ Ratcheting Socket Wrench
  • 1/4′ Socket
  • Phillips Screwdriver
  • Pliers

1. Mark the center point on the rear c- channel cross-member between the risers of the gooseneck.

2. Mark the center point on the light bar (42′ wide) and align light bar in center of cross-member.

3. Make sure light bar is positioned in desired location. Carefully mark the position of the holes on the light bar on the cross-member.

4. Using a 3/8′ drill bit (or larger), drill two holes through the cross-member on marks made in previous step. Tip: Use a smaller bit to create “pilot hole” before drilling your final holes.

5. Place light bar on to cross-member and insert bolts into their holes. Install supplied bolts & washers on each side using 1/2′ wrench (Using a ratcheting socket on top bolt and open end wrench on lower nut works best).

6. Optional: Route wiring inside of conduit gooseneck using an electrician’s snake for maximum protection. If you don’t have a snake to run the wiring, you can “zip tie” the wiring along the inside frame of the gooseneck.

7. Pull wire through to junction box and trim at desired length. Splice cable exposing the positive wire (black) and ground wire (white).

8. Open junction box by removing two screws with phillips screwdriver.

9. Using a 1/4 socket, install white wire (negative) on to blue post (ground). You can add an optional ring terminal for cleanest installation. Install the included short black wire lead with fuse (positive) on to red post (hot).

10. Trim black wire (positive) from light bar back to desired length in preparation for inline fuse & wire to be installed.

11. Place inline fuse over wire from light
bar, then crimp the fuse holder using pliers.
12. Replace cover on junction box and
hook up trailer to towing vehicle. With the ignition in the towing vehicle on, switch toggle switch to on position to test lights.

Stake Pocket Spare Tire Mount (Removable)

Want to add a Spare Tire Mount to your PJ Trailer but don’t want to weld it to the frame? Our stake pocket spare tire mount bolts on in less than a minute. If you like this accessory you might also like our Stake Pocket D-rings

  • Fits PJ 5 on 5, 6 on 5.5, and 8 on 6.5 bolt patterns
  • Takes less than a minute to install
  • Made from 1/4′ smooth plate and 2′ x 2′ rectangular tubing
  • Black Powder Coat Finish
  • Drive-in studs must be added depending on wheel size (Available at PJ Dealers or through PJ Parts)
  • Fit most PJ Trailers with 5′, 6′, or 8′ outside frame (channel or tube)
  • Not for use on dump trailer stake pockets, does not fit PJ utility trailers
  • PJ Part Number: 160438
Play Video about Man installing PJ Spare Tire Mount on Trailer

STAKE POCKET D-RINGS​

Ever wish you could move your d-rings to different positions around your trailer depending what you were hauling?

If so, our stake pocket d-rings make a great addition to any PJ Trailer with our 3 3/4″ inside diameter stake pockets.

You can simply slide the channel inside the stake pocket and insert the hitch pin.

  • Fits PJ 3 3/4″ ID Stake Pockets
  • D-ring rated at 11,780 lbs
  • Can be moved in seconds with no tools
  • Black Powder Coat Finish
  • Includes hitch pin
  • Not for use on dump trailer stake pockets
  • Stake Pocket D-rings do not fit most C4 Carhauler or Utility Trailers (Use Utility D-ring instead)
  • PJ Part Number: 180080
Play Video about Man installing PJ stake pockets on a trailer

Utilty Stake Pocket D-ring

We have developed a utility trailer version of our extremely popular stake pocket d-rings.

This version uses a lighter d-ring and has a notch cut to clear the wrap tongue on a PJ utility trailer and 4″ Channel Carhauler.

  • Fits PJ utility trailers and 4″ Channel Carhauler
  • Channel is notched to clear trailer tongue
  • D-ring rated at 2,000 lbs
  • Can be moved in seconds with no tools
  • Black Powder Coat Finish
  • Includes hitch pin
  • PJ Part Number: 180078

Stainless Steel Wheel Simulators

These D.O.T. liners from Phoenix USA not only look great, but they also require no removal of lugs for mounting. Made from T304L stainless steel for lasting beauty and durability, these liners feature a protective rolled edge for strength and handling safety. These wheel simulators won’t violate your manufacturer’s chassis warranty and are easy to install and remove with no additional tools required. Everything you need is included.

Details/Specs:

  • Fits dual wheel tandem trailers, 5/8 in. stud size
  • Wheel Diameter (in): 16″ or 16.5″
  • Installation: Bolt-on
  • Wheel Simulator Material: Stainless steel
  • Wheel Simulator Finish: Natural
  • Wheel Style: One-piece
  • Position: Front and rear
  • Quantity: Sold as a set of 4

When you purchase a new trailer or create your own custom option, you need the right accessories to go along with it. From stake pocket spare tire mounts to a solar battery charger, accessories from Nationwide Trailers can help you get the most out of your trailer, whether you’re hauling cars or landscaping equipment in Texas, Oklahoma or Arkansas.

OPTIONS FOR ALL TRAILERS IN TEXAS​

  • Solar battery charger: Dump and tilt trailers can use our two-watt solar charger to keep the battery running as long as you need it to. It comes with a five-year limited warranty.
  • Weld-on cargo tie-down loops: This utility trailer accessory is perfect for strapping down mowers, four wheelers, motorcycles and more. This is great for people who want to use tie-down loops as opposed to stake pockets.
  • Bolt-on chain rack: This bolt-on chain rack stores up to five chains and can be mounted to either the driver or passenger side.
  • Wireless remote for trailers (removable): Dump trailers, tilt trailers and more can use this wireless remote to make operating your hydraulics fast and convenient. It’s built by the same manufacturer as our hydraulic pump, making it easy to install and get to work.
  • Bolt-on light bar: Our bolt-on light bar is perfect if you always load or unload your trailer at night. The bar has four utility lights that give you plenty of light. Plus, it installs in 30 minutes.
  • Stake pocket spare tire mount: One of the perfect car trailer accessories is a stake pocket spare tire mount that bolts on in under a minute. It’s great when you need a spare tire mount for your trailer without welding it to the frame.
  • Weld-on stake pocket D-rings (removable): With weld-on stake pocket D-rings from Nationwide Trailers, you can move your D-rings to different positions depending on what you’re hauling. Whether you need utility trailer accessories or landscape trailer accessories, these D-rings will help.
  • Cold weather wiring harness: When you work year-round, a cold weather wiring harness will stay flexible even when the weather gets cold.
  • Stainless steel wheel simulators: This is one of the easiest ways to customize your trailer, and it gives you a high-end stainless steel look. It’s the perfect enclosed trailer or utility trailer accessory.

WHY CHOOSE NATIONWIDE TRAILERS?​

Nationwide Trailers is your one-stop shop for all your trailer needs. We have a huge inventory of trailers as well as trailer accessories that can help you build the best asset for your needs whether you’re in Oklahoma, Texas, or Arkansas. If you can’t find a trailer that’s right for you, we’ll help you build a custom trailer that will keep you running efficiently for years to come.
Contact us today to learn more about our trailer accessories.

Service Appointment

EZ Financing Options

When it comes to payment options, we’ve got you covered. We understand that everyone has different needs, which is why we’ve got a whole range of financing options available.

Bank Financing

Rent-To-Own

Contact Us

Questions about the specs? Need a written quote? Our experts are here to help!